|
|
EXCALIBUR 6500/6550 EVOLUTION SERIES 2 - PVC FREE - PHTHLATE FREE INKS- ADDITIVES AND REDUCERS
|
|
|
|
ANTI-BUILD UP ADDITIVE
|
|
| Anti-Buildup Additive can be mixed into ink to greatly reduce build up problems. Build up can occur when printing inks wet on wet and the wet ink keeps building up thicker and thicker on the backs or undersides of the screens, eventually causing poor print quality. The use of the additive can also increase production by avoiding down time cleaning the undersides of screens. Build up quite often occurs when printing high opacity and fluorescent inks. |
| SKU: |
EX6130-ABA |
|
|
|
|
CURABLE REDUCER
|
|
| 6501 Curable Reducer is a perfectly balanced reducer that can be used in virtually any quantity. It will not affect the cure ability of the ink. It is ideal for general viscosity reduction. It can be used to achieve a softer hand. It is recommended to be used in most direct printing plastisol inks including: Excalibur Evolution II inks. Please Note: The print opacity may be reduced with the addition of 6501 Reducer. |
| SKU: |
EX6130-CURRED |
|
|
|
|
LOW CURE ADDITIVE
|
|
| Low Cure Additive reduces curing temperatures in all Excalibur Evolution Inks. Allows inks to fully cure at a temperature of 265'F (130'C) to 270'F (133'C). A simple addition of 5% - 6% of Low Cure Additive (LCA) by weight will reduce curing temperatures as low as 265'F (130'C). |
| SKU: |
EX6130-LCA |
|
|
|
|
VISCOSITY REDUCER
|
|
| For softer hand, limited amounts of 6502 Reducer may be used to achieve the desired consistency. Limited amounts of 6502 Reducer will duplicate the look and feel of a water based print. It will remain as an integral component of the cured design. Gelation and fusion temperature properties of the base plastisol will change with the addition of 6502 Reducer. Use of 6502 Reducer may increase curing time. Use maximum of 3% to 5%. |
| SKU: |
EX6130-REDUCER |
|
|
|
|
HIGH STRETCH ADDITIVE
|
|
| High Stretch Additive greatly increases stretchability of Excalibur direct printing Inks. Add 5% HSA to Excalibur Evolution inks by weight. |
| SKU: |
EX6130-HSA |
|
|
|
|
MATTE ADDITIVE
|
|
| Excalibur Matte Additive is a dulling paste which can be mixed into Plastisol ink to greatly reduce the gloss. The result is a smooth matte print. Matte additive does not contain any puffing agents. Matte additive will also reduce the tack or stickiness of inks. Matte additive is in paste form and must be stirred well into the plastisol ink at the ratio of 6% to 10% by weight. |
| SKU: |
EX6130-102 |
|
|
|
|
THICKENER
|
|
| Use Thickener to thicken plastisol inks. Use very sparingly as excess amount will overly thicken the plastisol ink and make it unprintable. |
| SKU: |
EX6130-THICKENER |
|
|
|
|
|